Safety in Mines Research Establishment

198 published titles

Light alloy supports

1 edition

Flame safety-lamp design : a review of looking and re-lighting mechanisms with some new suggestions

1 edition

Measurement of dynamic pressures

1 edition

The pressure generated during explosion of a pentane-air mixture inside a core-cooled motor

1 edition

Rat extermination in mines

1 edition

The SMRE manometer, mark 2, for recording explosions behind stoppings

1 edition

Ignition hazards associated with the use of a buffing machine underground

1 edition

The use of guncotton in the testing of flameproof enclosures

1 edition

The health hazard of shales used for stone dusting

1 edition

Ignition o conveyor belts by frictional heating

1 edition

Testing machine for springs used in the locks of miners' flame safety lamps

1 edition

Interim report on the size of dust in lungs of coal miners

1 edition

The testing of pneumatic percussive drilling machines for dust production

1 edition

The SMRE convergence recorder

1 edition

The size classification of airborne dusts in mines

1 edition

Bibliography of publications and reprints. Annotated addenda

1 edition

The consolidation of floor dust on mine roadways

1 edition

The dust assessor : a sampling instrument for airborne dust clouds based on a permeability method

1 edition

An automatic dust sampler

1 edition

Argon flash units : their design and applicationto snapshot photography of detonating explosives

1 edition

The use of break-flash apparatus no.3 for intrinsic safety testing

1 edition

Fire-retardant treatment of mine timber : a survey of possible methods

1 edition

Slow burning of permitted explosives as a possible cause of hangfires or delayed explosions

1 edition

Dispersion of dust deposits by blasts of air

2 editions

The dust produced by rotary drilling machines

1 edition

The pressure generated during explosion inside a core-cooled motor. Mixtures of methane in air and of hydrogen/methane 85/15 in air

1 edition

An angle comparator for laboratory use

1 edition

Apparatus for the demonstration of gas caps on the flame of a safety lamp

1 edition

Non-destructive testing of colliery gear

1 edition

Stone-dust barriers : a precaution against explosions in mines

1 edition

Some experiments in the removal of toxic gases from diesel engine exhausts

1 edition

Intrinsic safety : a résumé of recent progress

1 edition

The safe withdrawal of supports

1 edition

The dispersion of dust by blast

1 edition

The ignition of firedamp by friction

1 edition

Applicability of short-period delay detonators in safety-lamp mines

1 edition

Procedures for assessing the relative safety of explosives and of coal dust/inert dust mixtures by means of gallery experiments

1 edition

A preliminary study of environmental conditions and pneumoconiosis

1 edition

The assessment of airborne dust concentrations in mines

1 edition

The quantitative determination of quartz by X-ray diffraction

1 edition

Still photography in coal mines

1 edition

The intercept length method for the automatic evaluation of dust samples

1 edition

A standard apparatus for determining the inflammability of coal dusts and mine dusts

1 edition

The colour measurement of mine dusts as a method of estimating their contents of inert material

1 edition

Sparks from aluminium paint : the firedamp ignition hazard

1 edition

Incendivity of frictional sparks produced within compressed-air motor and expelled in the exhaust

1 edition

The heat treatment of colliery haulage and winding gear

1 edition

A study of the Leitz tyndallometer

1 edition

Detection of heatings and fires in coal mines

1 edition

Ignitors for experimental coal dust explosions

1 edition

The health hazard of limestone and gypsum used for stone dusting in coal mines

1 edition

Yielding props : laboratory trials of the 'Dowty' hydraulic prop

1 edition

The pressure produced in the surrounding air by a blown-out shot of permitted explosive : Effect of symmetrical reflection of the shock wave

1 edition

The cooling of diesel locomotive conditioner boxes : a study of the flameproofness of two proposed devices

1 edition

Two testing sets for determining the inductance and effective resistance of coils with iron cores

1 edition

A note on the strain produced during explosion inside a core-cooled motor

1 edition

The role of flanges in conferring protection on flameproof electrical enclosures

1 edition

The ignition hazard from sparks from magnesium-base alloys

1 edition

An assessment of the hazard caused by arsenious fumes from impregnated timber n underground fires

1 edition

The measurement of size and concentration of airborne dusts with the electron microscope

1 edition

SMRE bibliography 1921-1952

1 edition

The effect of modifications of the surface of quartz on its fibrogenic properties in the lungs of rats

1 edition

Inflammability of brattice cloth

1 edition

A piezo-electric recording manometer

1 edition

Dust explosions in factories : closed-circuit test apparatus

1 edition

Yielding props : @ @

1 edition

The ignition hazard from sparks from cast iron alloys of magnesium and aluminium

1 edition

Handpump sampling in coal-dust clouds : optical denstiry method

1 edition

Trails with an experimental long-period sampler for airborne dust

1 edition

The protection of hydraulic couplings against overheating

1 edition

The deposition of dust in return airways

1 edition

The diffusion of a vapour cloud in a ventilated roadway

1 edition

New testing procedure for Eq.S and sheathed explosives

1 edition

The ignition of explosive gas mixtures by friction

(Contributor)

1 edition

The salt-crust method off roadway treatment

1 edition

Convection effects from underground fires : the backing of smoke against the ventilation

1 edition

Pulsed infusion shotfiring

1 edition

Deposition of airborne dust in a wind tunnel (interim report)

1 edition

A laboratory dust cloud producer

1 edition

Waterproofed stone dust for coal mines

1 edition

The deposition of dust on conveyor roads

1 edition

The dust produced by rotary drilling machines. Part 2, Power consumption in relation to dust production

1 edition

Non-sparking friction pads for yielding props

1 edition

Internal re-lighters for gas-testing flame safety-lamps

1 edition

The inflammability of magnesium, aluminium, and magnesium-aluminium alloy dusts

1 edition

Dust suppression by dust traps during drilling

1 edition

Tests in gas-air mixtures of a humane horse killer for use in safety lamp mines

1 edition

The effect of aluminium salts on the solubility of quartz dust and its electrokinetic properties

1 edition

The solubility of quartz dust

1 edition

Electrostatic hazards in coal mining

1 edition

Flameproof enclosures for mining electrical equipment : the protection afforded by flanges of one half-inch radial breadth for mixtures of methane and air

1 edition

The emission of gas from alkaline cells

1 edition

The measurement of the permeability of a dust

1 edition

The estimation of the density of dust depositions by their optical reflectivity

1 edition

Further studies of the solubility of silica

1 edition

Diesel locomotives in mines : the fire hazard from hot surfaces on exhaust system

1 edition

Accident control charts

1 edition

The design of closed-circuit breathing apparatus for mine rescue work

1 edition

The explosion hazard from localized deposits of coal dust

1 edition

Fire fighting in underground roadways : experiments with foam plugs

1 edition

Studies, by a radio-active tracer method, of the turbulent diffusion of gas and fine dust in mine ventilation currents

1 edition

The relative ignition risk of coal dust clouds by permitted explosives

1 edition

The ventilation of the battery containers of storage battery locomotives

1 edition

The ignition of explosive gas mixtures by small combustible particles. Part 1, Ignition by particles of pyrophor bar

1 edition

The preparation and assessment of size-graded mineral samples

1 edition

The ignition hazard from leaks of compressed air

1 edition

The smouldering of coal-dust and the effect of lubricants

1 edition

The detection of weld flaws in chain links

1 edition

Geiger-Muller counter equipment for quantitative x-ray diffraction analysis of powders

1 edition

The overload performance of powder couplings : the prevention of the fire hazard

1 edition

Some instruments and instrument techniques in use at the Safety in Mines Research Establishment

1 edition

Research on spontaneous combustion of coal in mines : a review

1 edition

An electron microscope study of airborne dusts in South Wales coal mines

1 edition

The corrosion of iron and steel in the salt-crust treatment of mine roads and its suppression by inhibiting agents

1 edition

The theory of dust deposition from a turbulent airstream by several mechanisms

1 edition

The composition of airborne dusts in coal mines

1 edition

Mechanism of the salt-crust method of roadway treatment

1 edition

The recovery of quartz and other minerals from the lungs of rats : a study in experimental silicosis

1 edition

Theoretical considerations of the pre-reaction zone of a coal-dust flame

1 edition

Some properties of airborne dust clouds in mining

1 edition

Variation of methane in return airways

1 edition

Calculation of the relationships between particle number, area, and weight concentration in coal mine dust clouds

1 edition

A resistance methanometer employing a low-temperature catalytic element

1 edition

Some interim notes on methane roof layers

1 edition

The use of models in the investigation of undergrou methane explosions

1 edition

Further development of twelve-shot exploders employing artificial lines

1 edition

A new twelve-shot exploder for gassy mines

1 edition

The mechanical properties of commercial wrought iron

1 edition

Practical aspects of the foam-plug method of fighting large mine-airway fires

1 edition

The development of light-weight steel shovels

1 edition

Tests of the Hurricane stemmer

1 edition

The emission of gas from lead-acid cells

1 edition

Wet collectors of respirable dust for use with coal mine vacuum cleaners

1 edition

The effect of different rates of emission on the accumulation of hydrogen in a vented battery container

1 edition

Mechanical scanning of a circular field

1 edition

Experiments on dust binding with aerosols

1 edition

The development of a two-hour closed circuit liquid-oxygen breathing apparatus providing cool inspired air

1 edition

Materials and equipment for the foam-plug method of mine firefighting

1 edition

Dust explosions in factories : a new vertical-tube test apparatus

1 edition

Mach waves in shock wave systems from a detonating solid explosive

1 edition

The strain-ageing behaviour of capel-socket materials

1 edition

The fatigue strength of threaded components in colliery suspension gear

1 edition

Rocket igniters for experimental coal-dust explosions

1 edition

Dust explosions in factories : speed of flame in slowly moving clouds of cork dust

1 edition

Interference methanometers

1 edition

The formation and movement of foam plugs for mine fire-fighting

1 edition

Salt-crust treatment of mine roads : the effect of salt on haulage ropes

1 edition

The effect of weld flaws on the static and fatigue strengths of wrought iron chain links

1 edition

The ignition of gas by the impact of light alloys on oxide-coated surfaces

1 edition

The heat-protection of timber by silicate-based coatings

1 edition

Fibrosis and collagen in rats' lungs produced by etched and unetched free silica dusts

1 edition

A study of the toxicity of dust using in-vitro dehydrogenase technique

1 edition

An automatic continuous sampler for airborne dust

1 edition

A study of the rat population in drift mines

1 edition

SMRE bibliography

1 edition

Dust explosions in factories : ignition testing and design of a new inflammator

1 edition

Gas chromatography for mine-gas analysis

1 edition

The thermal precipitator and the PRU handpump : a critical study

1 edition

The ignition of methane-air by the glancing impact of metals on smears of light alloys formed on rusty surfaces

1 edition

Photometric evaluation of konimeter and other dust samples

1 edition

Dust explosions in factories : field-scale tests on an explosion detector and two types of quick-closing valve

1 edition

An investigation of wear in wrought iron and mild steels

1 edition

Experiments on methane roof layers : multiple sources

1 edition

A review of tracer studies of turbulent mixing of respirable dust with the ventilating air in mines

1 edition

A semi-automatic handpump for obtaining a sample of respirable-size airborne dust

1 edition

The effect of inert dust on flame speed in coal-dust explosions

1 edition

On the relation between flame and blast in coal-dust explosions

1 edition

On the behaviour of the flame safety lamp in layers of methane

1 edition

Photographic studies of the ignition of methane-air by detonating explosives

1 edition

On the influence of the permitted ignition rate in the assessment of explosives

1 edition

The filter-paper method of airborne dust measurement in coal mines

1 edition

Research on the incendivity of coal-mine explosives : a review

1 edition

Dust explosions in factories : a review of the literature

1 edition

An investigation of abnormal structure in a 1.5% manganese mild steel

1 edition

Safety in Mines Research Establishment

1 edition

Factors affecting the performance of friction props

1 edition

Flameproof enclosures for mining electrical equipment : influence of atmospheric moisture on maximum safe gaps in mixtures of methane and air

1 edition

OP : Great Britain

1 edition

Experiments on methane roof layers

1 edition

Experiments with colliery stone dust coated with a flame inhibitor

1 edition

The extinction of experimental fires with foam plugs

1 edition

A note on some statistical aspects of explosives testing

1 edition

A longitudinally resonant stub for vibrations of large amplitude

1 edition

Suppression of coal-dust explosions by water jets

1 edition

Dust explosions in factories : explosion vents in pulverized fuel plants

1 edition

The ignition of gas by the impact of brass against magnesium anodes and other parts of a ship's tank

1 edition

The influence of cannon wear and other variables on the probability of ignition of methane-air in a cannon test of coal-mining explosives

1 edition

Experiments on steady state diffusion in turbulent pipe flow

1 edition

A model duct for mine fire research

1 edition

Model studies of heat transfer in mine fires

1 edition

Safety in mines research : annual report of the Safety in Mines Research Establishment. 47th: 1968

(Contributor)

1 edition

S.M.R.E. bibliography

1 edition

Safety in mines research : annual report of the Safety in Mines Research Establishment. 48th : 1969

(Contributor)

1 edition

Safety in mines research : annual report of the Safety in Mines Research Establishment. 49th: 1970

(Contributor)

1 edition

Safety research

1 edition

Safety in mines research : annual report of the Safety in Mines Research Establishment. 50th: 1971

(Contributor)

1 edition

Annual report

3 editions

SMRE/HSL bibliography, 1969-78

(Contributor)

1 edition